EN
3
multiple socket outlet PV4-MID-PS
•
Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.
•
Do not under any circumstances use the device if you
detect damages on the mains plug or power cable. If the
supply cord is damaged, it must be replaced by the
manufacturer, his service agent or similarly qualified
persons in order to avoid a hazard. Defective power cables
pose a serious health risk!
•
Always plug in only one device per socket and never cover
the multiple socket outlet.
•
Multiple socket outlet plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) electrical devices. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
•
Do not force the power tool. Only use the device with the
capacity range specified on the nameplate.
•
Observe the storage and operating conditions as given in
the Technical data chapter.
•
Do not expose the device to heat or direct sunlight.
•
Do not manipulate the device and do not make any
adaptations to the multiple socket outlet.
•
Always plug in only one device per socket and do not cover
the multiple socket outlet during operation.
•
Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
•
Any operation other than as described in this manual is
prohibited. Non-observance renders all claims for liability
and guarantee null and void.
Intended use
The device serves as mobile multiple socket outlet.
The multiple socket outlet is suitable for indoor and outdoor
applications.
Only use multiple socket outlets matching the protection type
required at the application site.
The device may only be used on grounded sockets of the
installation site.
The device may only be used complying with the voltage and
capacity range specified on the nameplate of the device.
When operating the device on construction or installation sites
at sockets of the building's site with unknown protective
measures, a BGI608-compliant plug adapter must be used.
Only qualified electricians are allowed to perform repair work on
the multiple socket outlet.
Improper use
Any unauthorised changes, modifications or alterations to the
device are forbidden.
Do not use the device in potentially explosive areas. Do not
place the device on wet or flooded ground.
Personnel qualifications
People who use this device must:
•
have read and understood the operating manual, especially
the Safety chapter.
Initial start-up and maintenance tasks which require the
housing to be opened must only be carried out by qualified
electricians.
Electrically skilled person
Electrically skilled personnel must be able to read and
understand electric circuit diagrams, to put electrical systems
into service and to maintain them, to wire control cabinets, to
ensure the functionality of electrical components and to identify
possible hazards from electrical and electronic systems.