EN
13
multiple socket outlet PV4-MID-PS
Warning
Risk of injury by unintentional start-up of consumers!
Electronic devices connected to the multiple socket
outlet can start up automatically and cause injuries
when a triggered residual current device restarts.
Only switch on the residual current device after having
switched off the connected devices or after having
disconnected them from the multiple socket outlet.
Maintenance
Visual inspection
Check the device for external damage before every start-up.
Should you detect any damage at the device or its mains cable,
have it fixed by a qualified electrician.
Regular inspections
Warning of electrical voltage
Work on the electrical components must only be
carried out by a qualified electrician!
Warning of electrical voltage
There is a risk of an electric shock when touching
damaged, open or live parts.
Never clean a live socket.
Always disconnect the mains plug from the socket
before cleaning it.
Never immerse the multiple socket outlet in water!
Clean the multiple socket outlet with a dry cloth.
The device must be regularly checked by a qualified electrician
for proper functioning and proper condition. If used in office
spaces or similar ambient conditions, this inspection shall be
carried out at least every 2 years. If used on construction and
installation sites, the inspection shall be carried out
every 3 months. If an error rate of < 2 % is reached, the
inspection intervals may be extended to max. once per year.
Checking the residual current device
Info
Generally, the power supply of all consumers is
interrupted for testing the residual current device.
Make sure that – when testing the residual current
device – no currently required consumer is connected
to the device.
The proper functioning of the residual current device (7) needs
to be checked at intervals of approx. 3 months.
The functionality can be checked by means of the test button
T
(2) every residual current device is equipped with.
If you press the test button
T
(2), an artificial residual current
will be generated and the residual current device (7) has to trip.
Also observe the inspection intervals specified in the regulations
and provisions (e.g. accident prevention regulations).
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website https://de.trotec.com/shop/.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.