EN
7
local air conditioner PAC 3500 X
•
Only position the device in rooms where there is no
permanent source of ignition (e.g. open flames, an active
gas appliance or an electric heater).
•
Set the device up in an upright and stable position.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are unrolled completely.
•
Keep air inlets and outlets as well as the exhaust air hose
connection free.
•
Make sure that no curtains or other objects interfere with
the air flow.
Inserting the air filter
Note
Do not operate the device without an inserted air filter!
Without an air filter the inside of the device will be
heavily contaminated, which could reduce the
dehumidification performance and result in damage to
the device.
•
Make sure that the air filters are installed before switching
the device on. All in all, the device comes equipped with
4 air filters at the air inlets (8, 10, 12).
8
8
10
12
Connecting the exhaust air hose
1. Loosen and remove the screw of the sliding cover.
2. Remove the slide at the top.
3. Extract the exhaust air hose.
4. Connect the exhaust air hose to the air outlet at the rear of
the device.
