EN
11
local air conditioner PAC 3500 X
Connecting the condensation drain hose
If you use the device for an extended period of time or you don't
want to empty the tank all the time, you can connect a
condensation drain hose to the hose connection.
ü
The device is switched off.
ü
The device is disconnected from the mains.
1. Carefully transport or wheel the device to a suitable
location for discharging the condensate (e.g. a drain) or
position a suitable collection container under the
condensate outlet.
2. Unscrew the sealing cap counter-clockwise from the hose
connection (13).
3. Remove the rubber stopper from the hose connection.
4. Keep sealing cap and rubber stopper for later use.
5. Connect the condensation drain hose to the hose
connection (13).
6. Guide the other hose end to a suitable drain or sufficiently
dimensioned collection container. To ensure that the
condensate can run off, the condensation drain hose must
not be kinked, nor should it have to overcome an uphill
incline towards the drain.
Ventilation
Info
Remove the exhaust air hose during
ventilation
.
In
ventilation
mode the room air is circulated, but not cooled.
1. Press the
MODE
button (18) until the
ventilation
LED (19) is
illuminated.
ð
Ventilation
mode is selected.
ð
The current room temperature is indicated on the
segment display (28).
2. Press the
SPEED
button (26) to set the desired fan speed.
ð
The
fan speed
LED (27) indicates the selected fan stage.
ð
The
ventilation
LED (19) will be illuminated to indicate
ventilation
mode.
