Trotec PAC 2010 S, Руководство по эксплуатации, Страница: 12 / 22

11 EN Operating manual – local air conditioner PAC 2010 S
5. Guide the other hose end to a suitable drain or sufficiently
dimensioned collection container. To ensure that the
condensate can run off, the condensation drain hose must
not be kinked, nor should it have to overcome an uphill
incline towards the drain.
Sleeping Timer
Mode
Speed
POW
ER
Slee
ping
Time
r
Fan C
oolin
g
Spee d
Dehum
idifying
Autom atic
°F °
C H
Ventilation
Info
Remove the exhaust air hose during ventilation .
In ventilation mode the room air is circulated, it will neither be
cooled nor dehumidified. The temperature cannot be adjusted.
1. Press the
Mode button (16) until the Fan LED (12) is
illuminated.
2. Press the Speed button (15) to set the desired fan stage.
ð
The Speed LED (10) for the selected fan stage will be
illuminated.
ð
The Fan LED (12) will be illuminated to indicate
ventilation mode .
Automatic operation
In automatic operation mode the cooling process will be
regulated depending on the ambient temperature and the preset
target temperature of 24 °C.
• With an ambient temperature equal to or above 24 °C the
device automatically runs in
cooling mode until the target
temperature of 24 °C is reached.
• If the ambient temperature is lower than 24 °C, the device
will automatically be operated in
ventilation mode.
• The target temperature is preset to a fixed value of 24 °C
and cannot be changed manually.
1. Press the Mode button (16) until the operating mode LED for
Automatic operation (12) is illuminated.
ð
The current room temperature is indicated on the
segment display (11).
2. Press the Speed button (15) to set the desired fan stage.
ð
The Speed LED (10) for the selected fan stage will be
illuminated.
ð
The Automatic LED (12) will be illuminated to indicate
automatic operation .
Setting the timer
The timer has two modes of operation:
• automatic switch-on upon expiry of a preset number of
hours
• automatic switch-off upon expiry of a preset number of
hours
The timer can be programmed in increments of 1 hour (1 h to
24 h).
The function can be set in all operating modes. It can be
activated both during operation and in standby mode.
Notice
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
ü
The device is switched off.
1. Press the Timer button (19) to activate the timer.
ð
The Timer LED (10) flashes for approx. 5 s.
2. Repeatedly press the Increase value (18) or Decrease value
button (17) to select the desired number of hours until
automatic switch-on.
ð
The segment display (11) indicates the number of hours
until automatic switch-on.
3. Wait for 5 seconds to confirm the setting.
ð
The Timer LED (10) is illuminated. The segment
display (11) switches off.
ð
After the predefined time, the device switches itself on.
4. In order to delete the setting, select 00 hours using the
Increase value (18) or Decrease value (17) buttons.
ð
The Timer LED (10) goes out.
Notes regarding automatic switch-on:
• If the device is disconnected from the power supply, all
settings for automatic switch-on are deleted.
• Manually switching the device on disables the automatic
switch-on function.
• If you select 0 hours, the timer will be off.