8017 Trotec Speedy
300 fiber
OPERATION
28/07/2015
Trotec Produktions- und Vertriebs GmbH
_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support
26 / 54
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
6
Front lid (opened in the shown picture)
If the front lid is opened, no data is processed. After closing the front lid,
the device is not ready to process commands for 5 seconds. If the front
lid is opened during operation, the motion system is stopped and laser
source is turned off.
Please note, that the laser tube is switched off
immediately
and
consequently the result of the process is incomplete. During processing
of commands the protection cover must only be opened after pressing
the "Pause" button.
7
Interlocks front lid
These interlocks turn the motion system and laser source off as soon
as the front lid is opened.
8
Focusing head
The lens that focuses the laser beam onto the material is mounted
inside the focusing head.
9
X axis
The motion system is that part that performs the mechanical
movements in X direction (horizontal) and Y direction (vertical). The X
axis is visible in the working area.
10
Ruler
Used to align material and measure it.
11
Working Table
The work pieces to be processed are put onto the working table. To
facilitate orientation, a horizontal and a vertical ruler are located on the
working table. The table is ferromagnetic for easier fixation of work
pieces.
12
Keypad
The Keypad contains multiple buttons and displays for controlling the
device.
See section 4.3 Keypad for further information.
