Tronix Explorer XT3, Руководство пользователя

Страница: 8 / 16

Below is a table of the status LEDs of Explorer XT3 and its corresponding indication:
Status Indication
Charging Green Charging LED indicator is blinking
Charging -
Battery full
Green Charging LED indicator stays lit
Battery full Green High LED indicator is lit
Battery at half
power
Yellow Mid LED indicator is lit
Battery low Red Low LED indicator is lit
Overload or
short circuit
Green High , Yellow Mid , and Red Low LED
indicators are lit
Aside from its normal use of powering strobes and flashes, the battery of Explorer XT3 will be
discharged if any of the following occurs:
•
Explorer XT3 is switched on at no load. The battery of Explorer XT3 will be discharged after 10
hours.
•
Explorer XT3 is switched off at no load. The battery of Explorer XT3 will be discharged after 200
days. Thus, when not in use, it is recommended that Explorer XT3 should be plugged in to a 100 V
to 240 V AC mains outlet or to a 14 V DC outlet.
•
Even when switched off, the internal circuitry of Explorer XT3 still consumes power. A totally
discharged battery will severely affect its useful life.
Should Explorer XT3 run out of power and no power source is present, the Tronix Auxiliary Battery
Pack can be connected to Explorer XT3. When the Auxiliary Battery Pack is connected, Explorer
XT3 bypasses its internal battery and draws power from the battery pack. Tronix Auxiliary Battery
Pack is sold separately. More information can be obtained from the Innovatronix website (see
Contact Information ).