Tronix Explorer XT3, Руководство пользователя

Страница: 12 / 16

Frequently Asked Questions
There are 2 models. How do I know which one will I need?
The model denotes the voltage output of the Tronix Explorer XT3. Select the model which
matches the input voltage of your studio lights or power packs. For example:
– The Tronix Explorer XT3 115-60 models are used by photographers in North America
(United States and Canada).
– The Tronix Explorer XT3 230-50 models are used by photographers in Europe, Middle
East, Australia, New Zealand and the rest of Asia.
How do I know if my strobe or power pack is compatible with Tronix Explorer XT3? Why not all
strobes and power packs are compatible with Tronix Explorer XT3?
Tronix Explorer XT3 is compatible to more digital strobes due to its increased power
rating . The newer Tronix Explorer XT3 is compatible to digital and most bi-voltage flash
units. However, compatibility to all strobes and power packs is not guaranteed due to
differences in design of strobes and power packs between brands.
In a few cases, digitally controlled strobes will not be compatible with Tronix Explorer XT3.
This is because after a flash is fired, the capacitors inside the strobe will draw a large
inrush current. Tronix Explorer XT3 cannot adequately provide such current. Thus, for a
few seconds, the voltage output will be less than adequate.
This is not a problem for analog flash, however. Analog flash can tolerate this voltage drop.
For digital flash units, this will probably cause a reset of its settings to power up stage.
Though this case is not damaging to the flash or Tronix Explorer XT3, the flash will just not
work properly.
How do I charge the Tronix Explorer XT3?
There are two ways to charge Tronix Explorer XT3:
- Mains outlet, 100 to 240 V AC. For a fully discharged battery, except for the initial
charging, charging can take about
6 to 9 hours .
- Car Battery. Plug the Tronix Explorer XT3 to the car cigarette jack through the 14 V DC
jack located at the rear panel of Explorer XT3.
How many pops can I expect with one full charge?
The number of pops will depend on the type of flash unit and the power loaded to Explorer
XT3. Small loads will produce greater number of pops and faster recycling time compared
to large power loads.
What are the things to watch out when using Explorer XT3?
Just like any portable power source from batteries, the recycling time of Tronix Explorer
XT3 for flash units and power packs can never be faster than the recycling time when a
studio light or power pack is plugged directly from a mains outlet or power line.