Tronix Explorer XT3, Руководство пользователя

Страница: 6 / 16

Getting Started
Shipping Materials
Please check if the shipped package contains the following:
-
1 Tronix Explorer XT3 unit
-
1 Power Cord
-
1 14V
DC
Car Battery Charger
-
User's Guide (this document)
Contact Tronix Customer Service or reseller in case any item is missing in the package
(see
Contact Information ).
Installation
1. Switch off Explorer XT3.
2. On the rear panel, plug the power cord to a 100 V to 240 V mains outlet.
The green Charging LED indicator should blink. This indicates that Explorer XT3 is charging.
If Explorer XT3 is being charged the first time, charge the unit for 12 to 15 hours. This ensures
optimum battery performance. Succeeding charges would only take 6 to 9 hours.
Note: The mains outlet to which Explorer XT3 is connected must be in close proximity and must
be easily accessed.
Explorer XT3 has the following power sources: AC mains outlet, car battery input and auxiliary
battery. Only connect one of these sources at a time. Though not posing any risk, simultaneous
connections of any of these inputs are not recommended.