(Stand: 10.2020)
Seite 20
©Tronitechnik GmbH
refrigerato r or freezer, remove the doors. Leave the shelves in
place so that children can't easily climb in.
8.
Preparation and activation of the freezer
8.1.
Unpacking the freezer
•
Remove all packaging materi al. These include the foam pad and all
adhesive tapes that keep the f reezer accessory inside.
•
Check and remove any leftovers from packaging, tape, or printed materi als
bef ore turning on the f reezer.
8.2.
Setting the freezer
•
Your freezer is for a free-standing installation only. It should not be sunk or
installed.
•
Place the f reezer on a f loor strong enough to f ully carry it.
•
When you move the freezer, never tilt it more than a 45-deg ree angle. This
could damage the compressor and the sealed system.
•
If the f reezer is tilted, leave it in an upright position for at least 24 hours
bef ore inserting it. This is used to allow the ref rigerant to settle. Failure to
comply can result in serious damage to the compressor.
8.3.
Proper air circulation
1.
To ensure that your f reezer works with maximum ef f iciency
for which it is designed, you should install it in a place where proper
air circulation, water and electrical connections are available.
The following are the recommend ed distances around the freezer:
Side 102mm
Back 102mm
Top Do not block
8.4.
Electrical requirement
•
Make sure that there is a suitable power outlet with proper grounding to
