Trojan Technologies Aquafine TrojanUVLogic Series, Руководство по установке и эксплуатации

Страница: 130 / 186

Control Panel (CP)
Trojan UV Logic Operations & Maintenance
2006-1-19
7-26
Reactor Hi Temp (Reactor High Temperature)
Configure Screen (Optional)
This screen allows the Operator to adjust the
following:
Reactor Temperature
°
C /
°
F : Temperature
can be set to either Celsius or Fahrenheit from
the Systems Setting screen page 2 if the analog
Reactor Temperature option is enabled.
Source: This field is a preconfigured live,
measured 4-20mA analog signal reading.
Major High Alarm: This Major High
Temperature alarm setpoint acts as a warning.
This field is adjustable between 0 – 60
°
C (32 -
140
°
F). Default is 45
°
C (113
°
F).
Critical High Alarm: This Critical Temperature
Alarm set point is adjustable between (0) and
60
°
C (32 and 140
°
F). The default setting is 50
°
C (122
°
F). This Analog Reactor Temperature
option works in a similar fashion to the Reactor
Hi Temp (Reactor High Temperature) Digital
Input. If the timed delay setting is set to
between 1 and 15 minutes, a delay will occur
before the alarm occurs and the lamp de-
energize. Setting a delay of (0) minutes causes
the alarm to occur and the lamps to de-
energized immediately.
Full Scale: This value is preconfigured at
100
°
C or 212
°
F depending on the Reactor
Units set. It cannot be adjusted.
Login Screen
If a password has not been entered, the system
will automatically allow Operator level access
only. Technician level access requires a
password entered on the Login Screen.
When you enter the Login Screen, you will be
prompted to enter your password. If you are a
Technician you will enter your password using
the keypad arrows to select each character.
Once, the password is entered select Enter
using the
Enter or Menu button.
If the password was incorrect, “INVALID”
Password text will appear. Correct incorrect
password numbers and select enter.
If the password was correct it will take you back
to the Main Menu Screen. You will notice that
along the bottom of the screen it will now say
TECH. This stands for Technician Level
access.
Note:
The Login screen will automatically
log the user out after 10 minutes.