Trojan Technologies Aquafine TrojanUVLogic Series, Руководство по установке и эксплуатации

Страница: 126 / 186

Control Panel (CP)
Trojan UV Logic Operations & Maintenance
2006-1-19
7-22
This screen allows the Operator to adjust the
following:
UV Sensor Units : The operator can select
either mW/cm2 or W/m2
units to view UV Intensity.
Changing the units
automatically scales the Main
Screen bar graph and set
points accordingly.
Alarm Delay: This field allows the
Operator to adjust the Alarm
delay to anytime between 10
and 999 seconds.
Minor Low UV STP: This is a preconfigured,
nonadjustable field that
indicates at which value a
Minor Low UV Alarm will be
triggered.
Major Low UV STP: This is a preconfigured,
nonadjustable field that
indicates at which value a
Major Low UV Alarm will be
triggered.
Temperature Units (not shown): This feature
sets the units of temperature
measure C - Celsius or F-
Fahrenheit and appears
when the analog Reactor
Temperature is available.
Dose Units: The operator can select either
mJ/cm2 or J/m2 units to view
UV Dose.
UV Sensor Alarm Delay : This field allows the
Operator to adjust the delay
for a UV Sensor alarm to any
value between 0 and 8
minutes. Default =0
The following system settings screen
information
should not be reconfigured unless otherwise
authorized by Trojan.
The information presented on this screen
includes the System Type, With or Without
Automatic Wiping, Equipment Usage (I.e.
Drinking Water), Number of Lamps, Lamp
Length (ie. 36 for 36 inch), Current Time and
Date, Firmware Name, and Version & Date.
Technician Level Access Screens
To access these screens you must have
entered the Technician’s Password at the Login
Screen. Then from the previous System
Settings screen select the “
Next ” button.
Note:
During startup, the UV Sensor Alarm
Delay + an 18 second alarm
suspension will occur before an
alarm appears. Refer to the Normal
Operation heading in this chapter for
more details.