Settings for different parameters:
Other changes are not possible. The values set at
the factory have been selected to insure trouble-free
operation.
The operating instructions for your central unit
(example: Central-Control 2000) will give you exact
procedures for setting the different parameters.
With many systems the values set at the factory
can be read in the programming mode.
37
*
CV
Description
DCC Value
Selectrix Value
1
address
1 – 99
1 – 99
3
acceleration delay
0 – 127
1 – 7
4
braking delay
0 – 127
1 – 7
5
maximum speed
1 – 7
1 – 7
17
Extended address (Upper part)
CV 29 Bit 5 = 1
not necessary
18
Extended address (Lower part)
CV 29 Bit 5 = 1
not necessary
29
bit 0: Travel direction polarity re lighting
0 / 1
not necessary
bit 1: number of speed levels 14 / 28
bit 5: address size 7 bit / 14 bit
49
pulse width for motor control
0 – 3
1 – 4
50
Rule variant
0 - 3
1 – 4
51
bit 0: Motor polarity reversal
0 / 1
not necessary
bit 1: Only lighting polarity reversal
Bit 2: Track polarity reversal
*
*
*
*
Important: Changes in the settings marked with
for the Selectrix mode of operation automatically
lead to changes in the DCC mode of operation
and vice versa!
Both powered end cars must always be functionally
connected to one another on the programming track
in order to program the train properly.
