29
About Bluetooth SMART®
The Test Buddy Pet-Monitoring Blood Glucose Meter uses Bluetooth SMART® to wirelessly connect
(pair) with the Test Buddy App on a mobile device(s) to transmit test results from the meter memory.
Test Buddy Pet-Monitoring Blood Glucose Meter contains FCC ID: 2ADDB-PET-01. This device
complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Note:
This meter has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This meter generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this meter does cause
harmful interference to radio or television reception, which can be determined by turning the
meter off and on, try to correct the interference by one or more of the following measures:
• Move the meter away from the radio or television antenna.
• Move the radio or television antenna away from the meter.
If you continue to have problems, contact Customer Care at 1-800-803-6025, Monday–
Friday, 8AM–8PM EST.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
Changes or modifications to the device not expressly approved by Trividia Health could void
the user’s authority to operate the device.
System Safety and Electromagnetic Compatibility
The Test Buddy meter was tested and found to comply with the electromagnetic emission and
immunity requirements as specified in IEC 60601-1-2 Edition 4.0. The meter’s electromagnetic
emission is low. Interference from the meter to other electronically driven equipment is not
anticipated. The electromagnetic environment should be evaluated prior to operation of the
device. Do not use the meter in a very dry environment, especially one in which synthetic
materials are present. Do not use the Test Buddy meter close to sources of strong electromagnetic
radiation, as these may interfere with the proper operation of the meter. Do not use electrical
equipment, including antennas, closer than 12 inches to any part of the Test Buddy meter.
PetMeterOwnersBooklet_XE4HTK03r1.indd 29
7/27/20 14:50
