13
6. Hold the test strip to the blood drop until
the meter beeps and dashes move across
the display.
This means you have applied
enough blood and the meter is testing.
Remove the test strip from the blood drop.
Note:
If the meter does not begin testing
soon after touching the sample tip to the
blood drop, discard the test strip. Retest
with a new test strip and new blood drop. If
the problem continues or an error message
appears, see
Troubleshooting
section.
7.
The result displays when the test is
completed. The result is automatically
stored in memory with the date and time.
Note:
Removing the test strip before the
result displays cancels the test. An error
message appears, and the result is not stored
in memory. Retest with a new test strip and
do not remove before the result is displayed.
The Event Tag symbols will fl ash if Event
Tags are turned on. Press to
switch between Event Tags and press to
select the correct Event Tag.
Optional:
Record the result in the logbook.
8.
Hold the meter with the test strip pointing
down. Press the strip release button to
discard the test strip into a suitable waste
container. The meter turns off .
Caution!
Used lancets and test strips are
considered biohazardous. Please discard
carefully into a suitable container.
How to Test Blood Glucose
(continued)
(Example only)
(Example only)
PetMeterOwnersBooklet_XE4HTK03r1.indd 13
7/27/20 14:46
