9
1.
With the meter off , insert a new test strip
into the test port.
2.
Use the buttons to switch between
the fl ashing cat and dog symbols.
3.
Press to save the correct animal symbol.
4.
The fl ashing drop symbol will appear,
indicating that the meter is ready for
testing.
5.
When the meter is turned off the animal
selection is saved in memory.
Note:
Follow the steps above to change the
animal type.
Setting/Changing Animal Type
Set the animal type ( dog or cat) when you use the meter for the fi rst time.
If testing more than one animal, make sure the correct animal type is displayed before you
begin testing.
Important!
Applying a sample drop (blood or control solution) without fi rst selecting the
animal type will give an error message (see
Error Messages
section).
PetMeterOwnersBooklet_XE4HTK03r1.indd 9
7/27/20 14:45