General Information
37
Traction Control Settings
Warning
If the traction control is disabled, the
motorcycle will handle as normal but
without traction control. In this
situation accelerating too hard on wet/
slippery road surfaces may cause the
rear wheel to slip, and may result in
loss of motorcycle control and an
accident.
The traction control can be set to one of
the following conditions:
ON
Optimal traction control setting
for road use, allows minimal rear
wheel slip.
OFF
Traction control is turned OFF.
The TC disabled warning light
).
Traction control defaults to ON after the
ignition has been switched OFF and
then switched ON again.
To Disable the Traction Control
To disable the traction control setting:
• Make sure the motorcycle is
stationary and in neutral.
• Turn the ignition to the ON position
and put the engine start/stop
switch in the RUN position.
• Press and release the SCROLL
button on the left hand handlebar
switch housing until ’ttcOn’ is
shown in the display.
• Press and hold the SCROLL button
for more than one second to
change between traction control on
and traction control off.
1
1.
Traction control off display
