Triumph Bonneville Bobber 2018 страница 100 Скачать руководство пользователя

Страница: 100 / 136

Maintenance

100

Front Suspension - Front

Fork Inspection

Warning

Riding the motorcycle with defective or

damaged suspension is dangerous and

may lead to loss of control and an

accident.

Warning

Never attempt to dismantle any part of

the suspension units, as all units

contain pressurised oil. Skin and eye

damage can result from contact with

the pressurised oil.

Examine each fork for any sign of

damage, scratching of the slider

surface, or for oil leaks.
If any damage or leakage is found,

consult an authorised Triumph dealer.

To check that the forks operate smoothly:
• Position the motorcycle on level

ground.

• While holding the handlebars and

applying the front brake, pump the

forks up and down several times.

• If roughness or excessive stiffness

is detected, consult your authorised

Triumph dealer.

Содержание Bonneville Bobber 2018









































































































































Результаты поиска

Содержание Bonneville Bobber 2018

Отзывы:

Похожие инструкции для Bonneville Bobber 2018

Бренды по названию

Популярные бренды

Triumph Bonneville Bobber 2018, Руководство пользователя

Результаты поиска

Содержание Bonneville Bobber 2018

Отзывы:

Похожие инструкции для Bonneville Bobber 2018

Бренды по названию

Популярные бренды