5 of 24
Technical Bulletin
184
Issue
1
7.
Press the Power ON/OFF button to turn the ignition OFF. Click Next, the download will begin.
ckdp_2
1
1.
Power ON/OFF button
Note:
•
The calibration download has two stages. When the first download stage has completed, the diagnostic
tool will prompt you to present a paired key to the LF antenna and press the Power ON/OFF button to
start the second download stage.
•
For this process, the smart key should be used to start the second stage of the download.
8.
When prompted by the diagnostic tool, ensure the smart key is still in range of the LF antenna and
press the Power ON/OFF button.
Note:
•
Multiple files are transferred during the download. The progress bar displayed on the diagnostic tool
may repeatedly rise from 0% to 100% as each file is downloaded.
•
Always wait for the Verifying Download screen to appear to confirm the download has successfully
completed.
9.
Click Finish when the download has completed.
Key Pairing
Note:
•
It is not necessary to re-register the keys on models built after the VINs listed below. Omit this section
of the procedure for models falling into the listed VIN ranges.
Market
Key pairing not required from VIN:
All markets except Brazil and Japan
869067 onwards
Brazil
873458 onwards
Japan
TBC
Note:
•
All three keys supplied must be re-paired to the chassis ECM on models built up to the VINs listed
above.
•
The Smart key must be paired first, followed by the passive keys.
•
Ensure the Smart key is in active mode (LED flashes green when the button is pressed).
•
Before selecting Re-Register All Keys, ensure that you have all keys being paired to hand.
•
A ten minute (600 second) security time delay is initiated at the start of the first key pairing. Do not
leave the motorcycle unattended during this time.
•
During the ten minute time delay, the pairing of the smart key used to power the motorcycle On is
retained. All other paired keys are marked inactive until they are re-paired.
