11 of 24
Technical Bulletin
184
Issue
1
Item:
184.4
Description:
Front Fork Reflector
Model Affected:
Thruxton 1200R
The installation instructions for the front fork reflector for the above models will be added to the relevant
Service Manuals at their next update.
Note:
•
When fitting a new reflector to the front fork, it must be fitted 105 mm from the lower edge of the
lower yoke.
1.
Using a cleaning wipe, clean the area of the front fork prior to fitting the reflector to the front forks.
2.
After allowing the cleaned area to dry naturally, peel the protective film from the back of the reflector.
Note:
•
When fitting self-adhesive parts care must betaken to ensure positioning is correct and accurate. Once
the adhesive has been attached to the mounting surface, there is no satisfactory method of removal or
re-positioning if incorrectly aligned. Initial bonding is instant, full bonding is achieved after 72 hours.
3.
Fit the reflector to the front fork 105 mm from the lower edge of the lower yoke, as shown in the
illustration below.
105 mm
1
2
1.
Reflector
2.
Lower edge of the lower yoke
Please mark your copy of the Service Manual with this information. For electronic service manuals, store
this information in a readily accessible place and refer to it often. This information will be included in the
next service manual update.
