4 of 24
Technical Bulletin
184
Issue
1
Core Activity
Warning
Always use Automatic Model Selection when downloading calibrations.
Manual model selection must only be used when attempting to restart an interrupted or failed download,
or if an incorrect model is detected by Automatic Model Selection.
Always ensure that the correct model is detected or selected before selecting a calibration for download
and never attempt to download calibrations listed for an incorrect model.
Downloading calibrations for an incorrect model will cause a dangerous riding condition which may lead to
loss of motorcycle control and an accident.
Caution
If the download is cancelled or interrupted (either by accidental disconnection of the interface, a
discharged battery, or by turning the ignition off) before it has completed, it will prevent the instruments/
ECM from operating in the normal way. This is because the instrument’s/ECM’s operating system has been
erased from memory and has not yet been fully replaced. The download must be restarted using Manual
Model Selection.
Note:
•
The current password for all downloads can be found at www.triumphonline.net.
•
It is normal for DTCs to be stored after a download has completed. This is due to the download process
interrupting CAN communications between the ECMs.
•
After a download has completed, you will be prompted to check and erase any stored Chassis ECM,
Immobiliser, TPMS, Engine ECM and ABS DTCs. This must be completed after all downloads are
complete.
Chassis ECM Calibration Download
1.
On the diagnostic tool, navigate to DOWNLOAD - CHASSIS ECM DOWNLOAD.
2.
Enter the password and click Next.
3.
Click Automatic Model Selection. On the Motorcycle Connection Instructions screen, click Connect.
4.
Check that the motorcycle is correctly detected then click Next.
5.
Select the available calibration and click Next.
6.
In the download confirmation screen, check the selected calibration is correct for the motorcycle and
click Confirm.
Note:
•
Upon clicking confirm to start the download, the diagnostic tool will prompt you the turn the ignition
OFF.
