Triumph Adler LP 4030, Руководство по продвинутой эксплуатации

Страница: 95 / 144

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-69
2
When the unit of measurement is set, press
@
.
>>X Dimension
appears (the paper width
setting).
3
Press [OK] . A blinking cursor (
_
) appears.
4
Press
?
or
@
to increase or decrease the value of the figure where the
cursor is blinking and display the desired width. The width can be set
between
148
and
216
mm. You can use
B
or
A
to move the cursor right and
left.
5
Display the paper width and press [OK] .
6 When the width is set, press
@
.
>>Y Dimension
appears (the paper
length setting). Set the desired length in the same way as the width. The
length can be set between
210
and
356
mm.
7 Display the paper length, press [OK] .
8 Press [Menu] . The display returns to
Ready
.
9 To print using the custom size set above, define the same custom size on
the printer driver.
Setting the Cassette Paper Type
By setting a paper type (plain, recycled, etc.) for the paper cassette, you
can automatically select the paper in the paper cassette according to the
paper type you command on the printer driver. The default setting is plain
paper for all paper cassettes.
For more information about paper types that you can feed from the paper
cassette, refer to
Paper Specifications on page 1-2 .
1 Press [Menu] .
2
Press
?
or
@
repeatedly until
Paper
Handling >
appears.
3
Press
B
.
4 Press
?
or
@
repeatedly until
>Cassette
Type
appears.
If optional paper feeders are added,
Cassette 1 Type
will appear for the
standard paper cassette and
Cassette 2 Type
,
Cassette 3 Type
>>X Dimension
216 mm
>>X Dimension
216 mm
Paper Handling >
>Cassette Type
Plain