Triumph Adler LP 4030, Руководство по продвинутой эксплуатации

Страница: 61 / 144

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-35
2
Enter the submenu by pressing
B
. Each time
you press
?
or
@
, the selection changes.
3
When
>>IP Address
is displayed, press
[OK] . A blinking cursor (
_
) appears at the
last digit.
4
Press
?
or
@
to increase or decrease, respectively, the value at the
blinking cursor. Use
B
and
A
to move the cursor right and left.
5
When the IP address is entered, press [OK] .
6 Press
?
or
@
to move to
Subnet Mask
. Perform the same procedure to
complete entering the subnet mask address.
7 Then, press
?
or
@
to move to
Gateway
. Perform the same procedure
to complete entering the gateway address.
8 Press [Menu] . The display returns to
Ready
. You can print a network
status page to confirm that the IP address, subnet mask address, and the
gateway address have been properly set. To print a network status page,
refer to
Printing a Network Interface Status Page on page 2-36 .
>>IP Address
000.000.000.000
>>Subnet Mask
000.000.000.000
>>Gateway
000.000.000.000
>>BOOTP
Off
>>DHCP
Off
>>IP Address
000.000.000.000