Triumph Adler LP 210, Инструкция по эксплуатации

Страница: 69 / 162

Working with the Windows printer tools 5
Laser Printer 200 Series 5-9
Switching on/off the Power Save mode
In order to save energy, the printer automatically switches to the Power
Save mode after a certain period of inactivity. When the printer receives a
new command or the control button is pressed while in this mode, the
printer automatically switches to the warm-up phase.
➜ Select “On“ and enter a time period after which the printer should
switch to the Power Save mode.
➜
Select “Off“ to deactivate the Power Save mode function.
Switching on/off the automatic continuation function
A print job is interrupted if the printer signals a format error or memory
overflow. The “Auto continue“ function enables you to determine whether
the print job should continue automatically after a certain time has elapsed
despite the presence of an error message.
➜ Select “On“ and enter a time period after which the a print job should
be automatically continued despite the error.
➜
Select “Off“ to suppress the automatic continuation function.
Specifying fast or normal printing modes
You can shorten the time before the first page of a job is printed.
➜ Select “Fast print“ to maintain the fusing unit at a high temperature.
This minimizes the time before the first page is printed.
➜
Select “Normal print“ to allow the fusing unit to cool down when
printing is not in progress. In order to print the first page of a print job,
the fusing unit must first warm up again and so more time is required
for the first page.