Triton TWSS10, Руководство по эксплуатации и технике безопасности

Страница: 5 / 98

5
EN
General Power Tool Safety Warnings
WARNING! When using electric power tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury including the following
safety information. Read all these instructions before attempting to operate this product and
save these instructions for future use.
WARNING
: This appliance is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless they have
been given supervision or instruction concerning use of the appliance by a person responsible
for their safety. Children must be supervised to ensure that they do not play with the appliance.
CAUTION : Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed. Use
of the power tool for operations different from those intended could result in a hazardous
situation.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 - Keep work area clear - Cluttered areas and benches invite injuries
2 - Consider work area environment
- Do not expose tools to rain
- Do not use tools in damp or wet locations
- Keep work area well lit
- Do not use tools in the presence of flammable liquids or gases
3 - Guard against electric shock - Avoid body contact with earthed or grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators)
4 - Keep other persons away - Do not let persons, especially children, not involved in the
work touch the tool or the extension cord and keep them away from the work area
5 - Store idle tools
- When not in use, tools should be stored in a dry locked-up place, out
of reach of children
6 - Do not force the tool - It will perform the job better and safer at the rate for which it
was intended
7 - Use the right tool - Do not force small tools to do the job of a heavy duty tool
- Do not use tools for purposes not intended; for example do not use circular saws to cut
tree limbs or logs
8 - Dress appropriately
- Do not wear loose clothing or jewellery, which can be caught in moving parts
- Suitable safety footwear is recommended when working outdoors.
- Wear protective covering to contain long hair
9 - Use protective equipment
- Use safety glasses
- Use face or dust mask if working operations create dust
WARNING : Not using protective equipment or appropriate clothing can cause personal
injury or increase the severity of an injury.
10 - Connect dust extraction equipment - If the tool is provided for the connection of dust
extraction and collecting equipment, ensure these are connected and properly used
11 - Do not abuse the power cable - Never yank the power cable to disconnect it from the
socket. Keep the power cable away from heat, oil and sharp edges. Damaged or entangled
power cables increase the risk of electric shock
12 - Secure work - Where possible use clamps or a vice to hold the work. It is safer than
using your hand
13 - Do not overreach - Keep proper footing and balance at all times
14 - Maintain tools with care
- Keep cutting tools sharp and clean makes the tool easier to control and less likely to
bind or lock in the workpiece
- Follow instruction for lubricating and changing accessories
- Inspect tool power cables periodically and if damaged have them repaired by an
authorized service facility
- Inspect extension cables periodically and replace if damaged
- Keep handles dry, clean and free from oil and grease
WARNING : Many accidents are caused by poorly maintained power tools.
15 - Disconnect tools - When not in use, before servicing and when changing accessories
such as blades, bits and cutters, disconnect tools from the power supply
WARNING: The use of accessories or attachments not recommended by the
manufacturer may result in a risk of injury to persons.
16 - Remove adjusting keys and wrenches - Form the habit of checking to see that keys
and adjusting wrenches are removed from the tool before switching it on
17 - Avoid unintentional starting
- Ensure switch is in “off’ position when connecting to a
mains socket or inserting a battery pack, or when picking up or carrying the tool
WARNING : Unintended starting of a tool can cause major injuries.
18 - Use outdoor extension leads - When the tool is used outdoors, use only extension
cords intended for outdoor use and so marked. Use of an extension cable suitable for
outdoor use reduces the risk of electric shock
19 - Stay alert
- Watch what you are doing, use common sense and do not operate the tool when you
are tired
- Do not use a power tool while you are under the influence of drugs, alcohol or
medication
WARNING : A moment of inattention while operating power tools may result in serious
personal injury.
20 - Check damaged parts
- Before further use of tool, it should be carefully checked to determine that it will operate
properly and perform its intended function
- Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting and any other conditions that may affect its operation
- A guard or other part that is damaged should be properly repaired or replaced by an
authorized service centre unless otherwise indicated in this instruction manual
- Have defective switches replaced by an authorized service centre
WARNING : Do not use the tool if the on/off switch does not turn it on and off. The switch
must be repaired before the tool is used.
21 - Have your tool repaired by a qualified person - This electric tool complies with the
relevant safety rules. Repairs should only be carried out by qualified persons, otherwise
this may result in considerable danger to the user
WARNING : When servicing use only identical replacement parts.
WARNING
: If the power cable is damaged it must be replaced by the manufacturer or an
authorised service centre.
22 - Power tool mains plugs must match the mains socket - Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs
and matching sockets will reduce risk of electric shock
23 - If operating a power tool outside use a residual current device (RCD) - Use of an
RCD reduces the risk of electric shock
24 - When used in Australia or New Zealand, it is recommended that this tool is ALWAYS
supplied via Residual Current Device (RCD) with a rated residual current of 30mA
or less.
25 - Use proper extension cord. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy enough to carry the current
your product will draw.
An undersized cord will cause a drop in line voltage resulting in
loss of power and overheating.
Even when used as prescribed it is not possible to eliminate all residual risk factors. Use with
caution. If you are at all unsure of the correct and safe manner in which to use this tool, do
not attempt to use it.
WARNING : Before connecting a tool to a power source (mains switch power point
receptacle, outlet, etc.) be sure that the voltage supply is the same as that specified on the
nameplate of the tool. A power source with a voltage greater than that specified for the tool
can result in serious injury to the user, and damage to the tool. If in doubt, do not plug in the
tool. Using a power source with a voltage less than the nameplate rating is harmful to the
motor.
Polarized Plugs (for North America only) To reduce the risk of electric shock, this equipment
has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
Whetstone Sharpener Safety
WARNING!
• Hold the power tool by insulated gripping surfaces only, because the grinding wheel
may contact its own cord. Cutting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
• The machine is Class 1 Category (earthed) and is fitted with a 3-core cable and
plug. Should the cable or plug be damaged, the product should be serviced by an
authorized Service Centre to avoid a hazard.
• It is strongly recommended that the tool always be supplied via a residual current
device with a rated residual current of 30 mA or less.
a) Wear adequate personal protective equipment including suitable safety glasses and
breathing protection. DO NOT wear loose clothing, REMOVE jewellery and tie long hair
back. DO NOT eat, drink or smoke in the work area. Keep children away
b) ALWAYS stand securely when working with this machine. NEVER lean over the
rotating wheels or overreach. ALWAYS be prepared to counteract kickback. Depending on
the orientation and rotation of the grinding wheel, a workpiece might be pulled out of your
hands or be thrown towards you
c) This machine is designed for the sharpening of tools and common household
blades. It is not intended for other grinding purposes, nor should it be used to grind other
materials not commonly used for tool blades
d) Sharpening should only be undertaken by persons familiar with the procedures,
necessary techniques and hazards involved. This manual only outlines the general use
of the machine, and cannot replace formal training in metalwork and tool sharpening or
practice
e) If you are unsure how to use the machine to sharpen tools safely and according to
rules and regulations, DO NOT use
949257_OwnerManual.indd 5 949257_OwnerManual.indd 5 18/10/2021 11:14 18/10/2021 11:14