11
Guarantee
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated otherwise) for
information on future releases. Details provided will not be made available to any
third party.
Purchase Record
Date of Purchase: ___ / ___ / ____
Model: TMUTL Retain your receipt as proof of purchase
ar
t pr
Triton Precision Power Tools guarantees to the purchaser of this product that if any part
proves to be defective due to faulty materials or workmanship within 3 YEARS from the
date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of charge.
This guarantee does not apply to commercial use nor does it extend to normal wear and
tear or damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights
oves to be defecti
Cleaning
WARNING
: ALWAYS wear protective equipment, including eye protection and gloves, when
cleaning this tool.
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly, and
will shorten the device’s service life
• Clean the body of your machine with a soft brush, or dry cloth
• Never use caustic agents to clean plastic parts. If dry cleaning is not sufficient, a mild
detergent on a damp cloth is recommended
• Water must never come into contact with the tool
• Ensure the tool is thoroughly dry before using it
• If available, use clean, dry, compressed air to blow through the ventilation holes (where
applicable)
Contact
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222
Web:
tritontools.com/en-US/Support
Address:
Powerbox
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
Storage
• After use, store this tool and its accessories in its case, in a dry, secure place out of the
reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are no longer
functional and are not viable for repair.
• Do not dispose of power tools or other waste electrical and electronic equipment (WEEE)
with household waste
• Contact your local waste disposal authority for information on the correct way to dispose
of power tools
Troubleshooting
Problem
Possible cause
Solution
Tool does not start when switch is operated
No power
Check power supply
Defective switch or tool fault
Return the tool to an authorised Triton service
centre for repair
Blade not cutting correctly
Speed setting too low
Increase speed
Material may not be suitable for the blade installed
Change blade
Material not suitable for tool
For some materials, including hardened metals,
compatible blades are unavailable. Revert to
alternative methods of cutting
Blade may be worn
Replace blade
Sanding sheets come loose from sanding pad during use
Speed set too high
Reduce speed
Too much downward pressure during use
Reduce hand pressure
Hook and loop surface of sanding pad worn out
Replace sanding pad
Unknown mechanical noise
Accessory not securely fitted
Check blade or other accessory is securely tightened
Tool fault
Stop using the tool and return it to an authorised Triton
service centre for repair
Burning smell or other abnormal operation
Tool fault
Switch the tool off and disconnect from power supply
immediately. Return it to an authorised Triton service
centre for repair
725112_Manual.indd 11
11/12/2018 12:39
Содержание TMUTL
Страница 2: ...2 7 8 9 10 2 3 4 5 6 11 12 11 9 14 3 2 13 725112_Manual indd 2 11 12 2018 12 39...
Страница 3: ...3 Fig I Fig II Fig III Fig IV 725112_Manual indd 3 11 12 2018 12 39...
Страница 4: ...4 Fig V Fig VI Fig VII 1 2 3 Fig VIII Fig IX 725112_Manual indd 4 11 12 2018 12 39...
Страница 5: ...5 Fig XI Fig XII Fig X 725112_Manual indd 5 11 12 2018 12 39...
