IVORY 4 electric shower
13
IMPORTANT:
Before finally fitting the cover,
the following steps must be taken:
a.
Check the plumbing connections are
watertight.
b.
Check the terminal block screws are fully
tightened.
1.
With the cover off the
shower
- turn the POWER
selector spindle clockwise
until the flat section is at
the bottom
(fig.13).
2.
With the cover off the
shower
- turn the stabi-
liser valve spindle fully
clockwise until resistance
is felt
(fig.14).
4.
With the cover off the
shower
- turn the tem-
perature control so that
it goes to Maximum HOT
(fig.16).
c.
Make sure the pipe and cable entering
the unit do not prevent the cover locating
correctly to the backplate.
d.
Check the power selector is in the OFF
position - and the temperature control is in
the MAXIMUM HOT position.
Fig.13
Fig.14
Fig.15
Fig.16
Flat section
to the
bottom
Stabiliser
valve
3.
With the cover off the
shower
- turn the power
selector to the OFF
position
(fig.15).
Содержание IVORY 4
Страница 24: ...IVORY 4 electric shower 22 Entry Points Diagram Key Water Entry Points Cable Entry Points...
Страница 25: ...IVORY 4 electric shower 23...
Страница 26: ...IVORY 4 electric shower 24...
