-
１３
- XM010-V1.4-NR
Press [UP] to select “ON” if you wish to enable this function or [DOWN] to select “OFF” if you don’t.
Press [MODE/ESC] to confirm.
Press [ENTER] in order to return to the main menu.
On the controller, set the DMX-value of channel 1 to "7".
Set the DMX-value of channel 2 to "7"or "8". When set to "7" you can adjust the starting address between 1 and
255. When set to "8" you can adjust the starting address between 256 and 511.
Set the DMX-value of channel 3 to the desired starting address. If you want to set the starting address to 57, set
channel 1 to "7", channel 2 to "7" and channel 3 to "57". If you want to set the starting address to 420, set channel 1
to "7", channel 2 to "8" and channel 3 to "164" (256+164=420).
Wait for approx. 20 seconds and the unit will carry out a reset. After that, the new starting address is set.
- Program Run, Master setting
With the function
"RUN"
, you can run the internal program. You can set the number of steps under Step. You can
edit the individual scenes under Edit. You can run the individual scenes either automatically (AUTO), i.e. with the
adjusted Step-Time or sound-controlled (SOUN). The selection "ALON" means Stand Alone-mode and "MAST"
that the device is defined as master.
1. Select
"AUTO"
or
"SOUN"
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
for selecting the desired extension menu.
3.
Select
"ALON"
or
"MAST"
by pressing
[UP]
or
[DOWN]
button.
4.
Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Display the DMX-value, Reverse display, Shut off LED display
- Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel.
1. Select
"VALU"
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
to confirm; the display shows
“D-00”
. In this setting, the DMX-adjustment of every channel
will be displayed.
3.
Press
[UP]
or
[DOWN]
button in order to select the desired channel. If you select
“D-14”
the display will only
show the DMX-value of the 14
th
channel.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
5. The display shows
"D- XX”
, “X” stands for the DMX-value of the selected channel.
- Reverse display
With this function you can rotate the display by 180
°
.
1.
Select
"RDIS"
by pressing
[UP]
or
[DOWN]
button.
