Tripp Lite UBC41, Руководство пользователя

Страница: 5 / 24

5
Specifications
Maintenance and Service
Maintenance
Your Tripp Lite Charger requires no maintenance and contains no user-serviceable or replaceable parts, but should be kept dry at all times.
Periodically check, clean and tighten all cable connections as necessary, both at the unit and at the battery.
Service
Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs
are also available from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service,
follow these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading
of the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.
3. If the problem requires service, visit www.tripplite.com/support. Click “Product Returns” from the left-side drop down or menu bar, then
select the “Request Return (RMA)” link. From here you can request a Returned Material Authorization (RMA) number, which is required
for service. This simple on-line form will ask for your unit’s model and serial numbers, along with other general purchaser information.
The RMA number, along with shipping instructions will be emailed to you. Any damages (direct, indirect, special or consequential) to the
product incurred during shipment to Tripp Lite or an authorized Tripp Lite service center are not covered under warranty. Products shipped
to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside
of the package. If the product is within its warranty period, enclose a copy of your sales receipt. Return the product for service using an
insured carrier to the address given to you when you request the RMA.
Input Voltage 100V ~ 240V Manual Switch
Input Frequency 50 / 60 Hz
Current (Without Load)
< 0.1A
Maximum Output Current < 15A
Maximum Efficiency in Max Power > 80%
Output Voltage 12V 24V 36V 48V
Maximum Ampere Imax
(Input Voltage Switch Set to “High”)
30A 30A 25A 15A
Minimum Ampere Imax
(Input Voltage Switch Set to “Low”)
10A 10A 10A 7A
Maximum Output Charging Power 450W 900W 1000W 900W
Voltage Sensor Startup Position 5V
Charging Range 8 ~ 14.8V 16 ~ 29.6V 30 ~ 39.9V 40 ~ 60V
Average Charging Voltage (Vblk) 14.5V 29V 42.6V 56.5V
Floating Charging Voltage (Vflt) 13.3V 26.6V 39.9V 53.2V
Protection Functions
Short Circuit Protection
Reverse Connection Protection
Internal Overheat Protection
Voltage / Current Precision < 5%
Longest Floating Charging Time No Limitation
Operating Ambient Temperature Full Load: -4° ~ 140°F (-20° ~ 60°C)
Operating Ambient Humidity Maximum 95% RV , Not Condensing
Cooling System Automatic adjust fan according to internal temperature
Average Internal Temperature <150°F (< 70°C)
Dimensions [L x W x H] 11.8 x 8.8 x 4 in. (300 x 223 x 101 mm)
Weight 9.9 lb. (4.5 kg)
Note: If the battery voltage is below the charge range, the charger may not run (turn on). For example, this can occur when the terminal voltage for a 12V battery is less
than 8V.