
31
Reboot
: Cut off the power of the PoE port, make PD rebooted.
4.3.2.1.
CLI Configuration
Node
Command
Description
enable
show pd-alive
This command displays the configuration of the PD
Alive Check.
enable
configure terminal
This command changes the node to configure node.
configure pd-alive (disable|enable) This command disables or enables the global PD
Alive Check for the Switch.
configure interface IFNAME
This command enters the interface configure node.
interface pd-alive (disable|enable) This command disables or enables the PD Alive
Check for the specific port.
interface pd-alive action
(reboot|alarm|all|none)
This command configures the action when the system
detects that the host cannot respond the keep-a-live
probe packet.
interface pd-alive interval
<10-120>
This command configures the interval to send the
keep-a-live probe packets to check if the host is still
alive for the specific port.
interface pd-alive ip IP_ADDR
This command configures the Host IP address which
connects to the specific port.
interface pd-alive retry-time
<1-5>
This command configures the retry times when no
response from the host for the keep-a-live probe
packet for the specific port.
interface pd-alive power-off-time
<3-120> startup-time
<30-600>
This command configures the power-off time and
startup time.
Содержание NGI-S08C2POE8
