Tripp Lite NGI-S08C2POE8, Руководство пользователя

Страница: 115 / 157

115
6.6.1.2. Web Configuration
Parameter Description
Port Isolation Settings
Port
Select a port number to configure its port isolation settings.
Select All Ports to configure the port isolation settings for all ports
on the Switch.
Egress Port
An egress port is an outgoing port, that is, a port through which a data
packet leaves.
Selecting a port as an outgoing port means it will communicate with
the port currently being configured.
Select All/
Deselect All
Click Select All to mark all ports as egress ports and permit traffic.
Click Deselect All to unmark all ports and isolate them.
Deselecting all ports means the port being configured cannot
communicate with any other port.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Port Isolation Status
“V” indicates the port’s packets can be sent to that port.
“-” indicates the port’s packets cannot be sent to that port.