13-8
EMPRESS
DINETTE/BED
5.
Booth Dinette(Optional:
The dinette also can be converted into a bed:
a. Remove cushions.
b. Lift table and remove the table legs.
c. Drop table between seats so that the edge
of the table rests on seat edge supports.
d. Arrange cushions to form a bed, placing
larger cushions in the center.
e. To convert back to a dinette, reverse the
above procedure.
13.16 SEATS
See section 4.4 for front seat control operation
information.
13.17 SEAT/SHOULDER BELTS
1.
Inspection:
Twice a year check that belts, buckles, latch
plates, retractors and anchorages work properly:
look for loose parts or damage (without disas-
sembly) that could keep the restraint system from
doing its job. Have a belt assembly replaced if
the webbing has been cut or otherwise damaged.
Also restraint systems should be replaced and
anchorages properly repaired if they were in
areas damaged by a collision, whether the belt
was in use or not. If there is any question, replace
the belt system. Damage whether visible or not,
could result in serious personal injury in the event
of an accident.
2.
Maintenance:
a. Hand wash webbing with warm water and
mild soap. Rinse thoroughly and line or air
dry.
b. Do not bleach or re-dye webbing, since it
could become severely weakened by this
process.
c. Inspect seat belt assembly regularly. If the
assembly does not operate properly or if the
SEAT/SHOULDER BELT
Содержание EMPRESS SERIES
