Step 2A.
Place the filter face side of the unit flat to the floor.
Step 2B.
If optional eyebolts are ordered, screw the four eyebolts into the nutserts
on the lid assembly before lifting into an overhead position.
Step 3.
Raise the unit and secure it into place using “S” hooks and chain to
suspend it from an overhead structure (supplied by others).
Step 4.
Plug the unit into the appropriate voltage (115V, 277V A.C.) grounded
receptacle (if purchased with optional power cord) or hard wire according
to the wiring diagram (section VIII), page 10.
Step 5.
Turn on the filter unit and let it run for a few hours before using in a clean
environment.
ELIMINATOR OWNER’S MANUAL
Page 3
