II.
SERVICE: Cleaning the ELIMINATOR’s Prefilter
WARNING!
Disconnect the unit from the electrical power source before attempting any service.
Note: To keep the filter in top operating condition, washing the foam prefilter is
recommended every three to six months.
Step 1.
To gain access to the prefilter, remove the ceiling panel next to the unit, if
applicable.
Step 2.
Remove the four screws and lift the prefilter off the prefilter frame. (see Figure
2).
Step 3.
Clean the prefilter by hand washing in water with a mild detergent of by using a
vacuum cleaner. Allow prefilter to dry completely before replacing.
Step 4.
Reassemble by reversing the above steps.
Figure 2
ELIMINATOR OWNER’S MANUAL
Page 4
