Trinity Highway QuadGuard M Wide, Руководство по сборке изделия

Страница: 33 / 64

TrinityHighway.com 32 Revision D March 2021
10) Nose Assembly
A. Pre-assemble each Nose Assembly half with 5/8X5” hex bolt, 5/8X1 3/4” flat washer,
bar washer, 3/4” schedule 80 pipe, and 5/8” rail nut (three (3) places per half (Detail
A & B). Tighten.
B. Join both pre-assembled Nose halves with Cartridge Support Nose Bracket using
1/4X3/4” hex bolts and nuts in six (6) places (Detail B & C). Tighten.
C. Fasten Pull-Out Brackets to front Diaphragm with 5/8X2” hex bolts and rail nuts.
Tighten (Detail D & E).
D. Attach Nose to Fender Panel and Diaphragm Hinge Plates with 5/8” rail nuts. Adjust
Nose assembly height so top front Nose is 32 1/8” above the concrete pad. Tighten
all six (6) nuts (Detail F & G).
E. Install Type I Cartridge insuring directional arrow is pointing to front of system.
F. Attach Hold Down Bracket to front of Nose with 5/8” fasteners (p. 34).
Detail B
CARTRIDGE SUPPORT
NOSE BRACKET
STEEL NOSE ASSEMBLY
Views A - D
Figure 33
NOSE ASSEMBLY (p. 51)
5/8X5 HEX
BOLT
Detail C
LEFT NOSE
PANEL
RIGHT NOSE
PANEL
BAR WASHER
5/8 RAIL NUT
Detail A
3/4 SCH 80X2 5/16 PIPE
5/8X1 3/4
WASHER
Detail A