TriMark 540-0200, Руководство пользователя

Страница: 5 / 12

AutoLatch Mode e-
PAD
Operation and Features
This mode is available in the 29810-05 version of the keypad only. It is
primarily intended for unlatching operations for a cabinet or door, where
activation of the keypad physically releases the door from the closed and
latched position.
The
e-
PAD
is shipped with default
Authority
and
Access Codes
. If the
OEM or dealer has not changed default codes, the
Authority
and
Access
Codes
are:
Access code:
Authority code:
Release Catch with Keypad
In AutoLatch mode, this function is not usually needed. However, this
function has been left in place in the event it is occasionally needed.
Press and hold down the (1 / 2) button for 1-2 seconds. An access code
is not needed to release a latch. This will not unlatch a door, it will move
the actuator so that the catch can allow the door to securely close.
Normally, this happens automatically in this mode.
Unlatch Door with Keypad
Entering a valid 5-digit access code provides a double beep and
unlatches the door. After about 5 seconds, the keypad automatically
activates again, releasing the catch and allowing the door to securely
close.
Notes:

The authority code does not unlatch the door. It is only used to
assign access codes (see page 5 for information on setting
authority and access codes).

If keypad does not provide double beep and does not unlatch, a
valid access code has not been entered.
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1 / 2 3 / 4 5 / 6 7 / 8 9 / 0
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
7 / 8 7 / 8 7 / 8 7 / 8 7 / 8
3