background image

Basic Display 

Angled Keypad

FRM072

Desk shown upside down

Package Contents

Step 1 - Attach Keypad to Desktop

There are keypad attachment holes pre-drilled into UPLIFT desktops. The pre-drilled 

holes are located on both the left and right sides so you can choose which side of the 

desktop you’d like to attach the keypad. Note: Typically the desk is upside down when 

assembling and attaching the keypad, so if this is the case the keypad will be on the 

opposite side once the desk is flipped upright.

If your desktop doesn’t have pre-drilled keypad holes, refer to the 

Optional Desktop 

Drilling Instructions

 on the back page.

A.  Align the keypad mounting holes with the pre-drilled holes in the desktop.
B.  Being careful not to overtighten the screws to avoid stripping (especially if using a 

drill to insert the screws), attach the keypad to the desktop with two #10x5/8” wood 

screws provided with your desk and labeled H14.

Keypad

(2) #10x5/8’’ Wood Screws

 (provided with desk and labeled H14)

C3

C4

C5

C9

H4a

H7

C6

H1

H2

H3

H5

H4b

H6

C7

C3

C4

C5

C9

H4a

H7

C6

H1

H2

H3

H5

H4b

H6

C7

Reviews: