Specialist Distributors for:
Sick (Photocells, Barcode readers & Safety), ifm efector, Red Lion Controls, Hohner,
Danfoss (Drives, Pressure & Flowmeters), British Encoder Products, MTE Turck Banner,
Phoenix Contact, Rechner industries, Foxtam Controls, Di-ell industries, Contrinex,
Allen-Bradley Multiswitch, Adam DAC Modules
Partners: J Dunnington, P Dunnington, M Dunnington
VAT Registration: GB 298 0364
29 Partnership No: OC305579
How to use the Danfoss VLT 2800 Keypad
•
Press
+
or
–
Button to view different operating data
•
Press
Quick Menu
Button and then
+
Button to locate the required parameter in the Quick
Set-up Menu (Parameter number will ‘Flash’ when in this mode)
•
Press
Change Data
Button to open options (NOTE: When Data is a large figure, it will be
shown as a row of dashes until
Change Data
Button is pressed).
•
Press
+
or
–
Button to raise or lower data. (NOTE: the longer you hold the Button in the
faster data will change).
•
Press
Change Data
Button to store data
•
Press
+
or
–
Button to move to next parameter or Press
Quick Menu
Button to go back to
Display Mode
•
To gain access to all other parameters in the Extended Menu, Press
Quick Menu and +
Button together this takes you into the first parameter 001
•
To get to the required Parameter, Press
+
Button, (remember the longer you hold in the
button the quicker it will run through the parameters).
•
Press
Change Data
Button, Data for that parameter will now flash
•
Press
+
or
–
Button to raise or lower Data
•
Press
Change Data
Button to store
•
Press
+
or
–
Button to move to next Parameter or
Quick Menu
Button to go back to
Display Mode
