More e-
PAD
Features
Protective Deactivating Security Feature
If a correct code is not entered after 20 button presses, the keypad
enters an inactive mode that disables button recognition for 1 minute.
This helps prevent unauthorized access by entering random codes.
There is no button feedback while the system is disabled.
Buzzer Operation
The keypad buzzer chirps once and for each key press during regular
use. When an authorized access code is entered, the system chirps
twice to indicate code acceptance and output activation.
The keypad chirps twice for each button press while in learn mode.
When a new access code is defined, the system chirps 3 times. If an
incorrect or mismatched code is entered during learn mode, there is a
1-2 second chirp.
Backlighting (optional feature)
The keypad buttons have lights that come on for one minute when any
button on the keypad is pressed.
Low Voltage Warning
When the keypad power supply is at a voltage less than 9.0V, the
keypad provides a short beep 0.5 seconds after either a lock or unlock
attempt. The lock output is deactivated to prevent unintentional lock-
out. Only an unlock command works.
Set Operation Mode
The keypad operation can be set to either standard mode or auto-
latch mode by following this process:
1. Press the (5 / 6) button for 5 seconds until the keypad beeps.
2. Enter the 5-digit Authority Code (keypad starts a continuous
beep).
3. Hold (9 / 0) button for 5 seconds, keypad will beep 5 times.
4. Press a button to select mode.
a. (1 / 2) button for standard mode.
b. (3 / 4) button for auto-lock mode.
5. One short beep sounds for standard mode or 2 beeps for auto
-lock mode.
4
Содержание 540-0200
Страница 12: ...UM28 34295 01 03 15 5...