Access Point Deployment Guide
45
NOTICE: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc.,
its subsidiaries, affiliates, and/or licensors. This document is provided subject to the confidentiality obligations set
forth in the agreement between your company and Trilliant. The contents may not be used or disclosed without the
express written consent of Trilliant.
Figure 24.
Backhaul Configuration screen
The following table defines the fields on this screen. To edit these fields, click on the
Disable
RF
button. After you make the changes, click on the
Save
button and then the
Enable RF
button.
Note:
If you disable the RF, the AP is still connected to the Gateway.
Table 9.
Fields on the Backhaul Configuration Screen
Field
Unit
Description
Control Socket Mode N/A
Options for this field are as follows:
•
Server
: When the AP is set to work in Server mode, it listens for a TCP connection
with the Total Reach Gateway on port number 2021. See descriptions below for
setting the following fields.
•
Client
: When the AP is set to work in Client mode, the AP requests service from the
Total Reach Gateway. See the field descriptions below for setting the following
fields.
Control Server Port
Number
N/A
The port number when the AP is set to Server mode. When the AP is in Server mode,
this field should be set to 2021. The AP listens on port 2021 for a TCP connection with
the Total Reach Gateway. Ensure that port 2021 is allowed on the firewall in your
network.
