AP Software Configuration via Web Interface
Access Point Deployment Guide
44
NOTICE: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc.,
its subsidiaries, affiliates, and/or licensors. This document is provided subject to the confidentiality obligations set
forth in the agreement between your company and Trilliant. The contents may not be used or disclosed without the
express written consent of Trilliant.
Field
Unit/Format Description
Node Cable Loss
dB
Default setting is 0 dB. Contact Trilliant Customer Support prior to
changing this parameter.
Node Antenna Gain
dBi
Default setting is 2 dBi. Contact Trilliant Customer Support prior to
changing this parameter.
Node Maximum
Transmit Power
dBm
This field is not editable. The value is determined by the settings for
Regulatory Domain and the other Node Transmit Parameters.
Power Control Parameters
Target Excess SNR
dB
Default setting is 1 dB. Contact Trilliant Customer Support prior to
changing this parameter.
Maximum BCH Power
Control Target
dB
The default value is set according to country-specific regulatory
requirements.
Minimum BCH Power
Control Target
dB
The default value is set according to country-specific regulatory
requirements.
Link Budget
Uplink
dB
This field shows the total amount of link budget available for the
uplink and is not editable.
Downlink
dB
This field shows the total amount of link budget available for the
downlink and is not editable.
AP Maximum EiRP
(Actual)
dBm
The actual maximum EiRP output for the AP.
Node Maximum EiRP
(Actual)
dBm
The actual maximum EiRP output for the Node.
Backhaul Config Submenu
The Backhaul Configuration screen (shown below) displays configuration parameters that were
set at the time the AP was deployed.
