Access Point Deployment Guide
23
NOTICE: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc.,
its subsidiaries, affiliates, and/or licensors. This document is provided subject to the confidentiality obligations set
forth in the agreement between your company and Trilliant. The contents may not be used or disclosed without the
express written consent of Trilliant.
AP Installation
AP and Ancillary Equipment
The AP installation includes installing the AP itself and the ancillary equipment listed below:
•
Access Point (AP)
•
AP antenna
•
AP antenna cable (50 ohm coaxial cable)
•
AP antenna cable lightning suppressor
•
GPS antenna
•
GPS antenna cable (50 ohm coaxial cable)
•
PoE injector, powered by 48 VDC
•
Site-specific power solution providing 48 VDC to the PoE, if not using the 120/240 VAC
powered base station cabinet or the solar powered base station
•
Backhaul equipment
•
Site-specific mounting hardware
Note:
We recommend that a backup power solution be utilized to power the AP in the event
of a power failure. The backup power solution should be designed to meet customer
requirements for the number of hours of backup power.
AP Installation Configurations
The small size of the AP (9.1” H x 8.1” W x 4.5” D) and light weight allows for many
installation configurations. For basic AP specifications, refer to “Basic AP Specifications” on
