3. Internal memory of the receiver is scanned via each port up to 1000 latest
messages. Memory can be scanned once only.
4. After reception of the message the display of the receiver shows
communication channel and receiver’s type, reception time, account number and event
code. Received message comes together with the sound.
5. The receiver has control buttons via which controlled communication channel
may be selected, current time and data may be set or all received messages may be
monitored.
6. The multichannel receiver has been set for data transmission to the centralized
monitoring programs, recognizing Surgard protocol. Data are transmitted at the speed
of 9, 6 kb/s; 8 data bits; data parity: none; 1 stop bit and flow control: none.
7. The multichannel receiver RI-4010M is supplied with 220V nominal voltage
from AC (50
±
1) Hz frequency network and from backup 12V battery, the capacitance of
which is not less than 7Ah. Permissible voltage alteration range
±
10
%
. Current from the
network does not exceed 0,15 A.
8. Considering type and number of built-in modules, working time of fully charged
battery does not exceed 5
÷
10 h. Current from the network does not exceed 1.2 A.
9. The multichannel receiver RI-4010M operates and maintains indicated
parameters at the air temperature from –10
°
C to +55
°
C and relative humidity up to 90
%
near +20
°
C.
10.
Overall dimensions of the receiver do not exceed 450x95x400 mm.
11. Mass without set-in modules and PC do not exceed 3 kg.
Control of the multichannel receiver, indication and external connectors
General view of the receiver is presented in Fig. No 1. Bodies of control and
indication are situated on the front panel.
LED indicates power supply of the receiver: POWER green – power supplied
from AC network, red – power supplied from DC source of backup battery.
LCD monitor of the receiver shows reception module type, communication
channel, message reception time and content of received message. General view of
received message is presented below:
41 1 12:38:15 0000 E350 01 000
Herein:
41 – Reception module type;
3 – Channel (line) number;
12:38:15 - Reception time;
0000 – Account number;
E350 – event code;
01 – Subgroup of alarm system, where the event occurred;
000 – Event place.
Detailed description of messages is presented in user guides of the modules.
The reception modules and the router of the multichannel receiver generate
service messages, enabling to control operation of the devices. General view of
displayed messages is presented below and content of the messages is explained in
annex No C.
TRIKDIS
Draugystės g. 17, LT-51229 Kaunas, Lietuva, tel. 8-37-408040, faks. 8-37-760554
el. paštas:
,
www.trikdis.lt
8
