www.trikdis.com
9
March, 2019
Cellular security control panel CG17
Schematics for connecting iO series extension modules
Note:
If the wire connecting the temperature sensor is longer than 0,5 m, it is recommended to use a
twisted pair cable
(UTP4x2x0,5 or STP4x2x0,5
).
To one
CG17
you can connect:
o
Up to four
iO-MOD modules
.
o
Up to eight
iO
or / and
iO-WL modules
.
iButton key readers
and
temperature sensors
should be connected to the
1-Wire
terminal.
Schematics for connecting inputs
The
CG17
has four inputs IN for connecting various alarm system sensors. Possible ways to connect a sensor: NO – normally
open contact; NC- normally closed contact; EOL – normally closed circuit with a 10kΩ end of line resistor. Possible connection
schematics:
Schematics for connecting a smoke detector
Assign a PGM output the function
Fire sensor reset
(see
TrikdisConfig
window “PGM” –> “Outputs” tab) so that the smoke
detector can be restarted after an alarm.
Connecting a four-wire smoke detector
