Product manual EM converterLED ST | 08-2018 | 1.0 | en
Safety instructions
c
5 / 38
The instructions in this section have been compiled to ensure that operators and users of combined emergency lighting LED Drivers
of the EM converterLED ST series from Tridonic are able to detect potential risks in good time and take the necessary preventative
measures.
The operator must ensure that all users fully understand these instructions and adhere to them. This device may only be installed and
configured by suitably qualified personnel.
2.1. Intended use
2.1.1. Proper use
Operation of LED modules in single battery supplied emergency lighting. The device may only be used for this intended purpose.
2.1.2. Improper use
Outdoor use. Extensions and modifications to the product.
2.2. Dangers associated with the operation of the system
2.3. Environment
½
WARNING!
Improper use could result in injury, malfunction or damage to property.
It must be ensured that the operator informs every user of existing hazards.
½
DANGER!
Danger of electrocution
Disconnect the power to the entire lighting system before working on the lighting system!
½
DANGER!
Not to be used in corrosive or explosive environments.
½
CAUTION!
Risk of damage caused by humidity and condensation
Only use the LED Driver in dry rooms and protect it against humidity!
_
Prior to commissioning the system, wait until the LED Driver is at room temperature and completely dry!
_
