TriCoder Portable Bar Code Reader, Руководство пользователя

Страница: 153 / 245

14-2
DATA TYPE ERROR
HIT ANY KEY_ Alphabetic character entered when
numeric is expected or vice versa. Re-enter data or change Data
Type in program.
DATA UPLOAD?
KEY [YES/NO]?_ Do you want to upload data? Press YES or NO.
DATA XMIT ERROR
CYCLE POWER
Data transmission error on upload or
other data transmission. Turn TriCoder off then restart
DELETE PROGRAM?
KEY [YES/NO]?_ Upon entering Programming Mode, you
selected a program and answered NO to
EDIT PGM? Do you want to delete? Press YES to delete program.
Press NO to go back to menu.
Downloading Firmware
Please Wait
Firmware Download has started. Wait 1.5 minutes for serial.
Wait 0.1 minutes for USB.
DUPLICATE ACCESS
HIT ANY KEY_
In a table where you have specified
NO DUPLICATE ACCESS you have
accessed a record twice. HIT ANY KEY. Enter a
different piece of data.
EDIT PROGRAM?
KEY [YES/NO]?_ In Programming Mode, do you want to
edit a program? You can edit program
#1,#2 or #3. Press YES or NO.
END OF FILE
HIT ANY KEY_ You are at the end of a data file or a
program file. Press any key to see last
record.
END OF PGM RECV.
HIT ANY KEY_ You have finished receiving a program
from another TriCoder or a host
computer. Press any key to go to the
Mode Menu.
END OF PGM XMIT
HIT ANY KEY_ You have successfully transmitted a
program to a host computer or another
TriCoder. Press any key to go to the
Mode Menu.
END OF TRANSMIT
DEL FILE [Y/N]?_ A data file has been successfully
uploaded. Do you want to delete the
file? Press YES to delete the file
Press NO to keep the file.
ENTRY TYPE ERROR
HIT ANY KEY_ In Programming Mode, you have
entered a character other than
DQTYSX at the ENTRY TYPE prompt. HIT ANY KEY and re-enter
character.
EOT, FILE ERASED
HIT ANY KEY_
During modem data transfer, End of
Transmission occurred and data file
was erased. HIT ANY KEY to go to Mode
Menu
EOT, FILE SAVED
HIT ANY KEY_ During modem data transfer, End of
Transmission occurred and data file
was saved. HIT ANY KEY to go to Mode
Menu
FATAL ENTRY TYPE
CYCLE POWER_
An invalid Entry Type has been
detected in your program. Cycle power
, see what happens. Turn TriCoder OFF/On. Call
for support if bad.
FATAL EXEC CALL
831-458-9938 NOW_ Something is definitely wrong. Cycle
power, see what happens. Turn TriCoder OFF/ON. Call
for support if bad.
FATAL STMT #.
CYCLE POWER_
An invalid Statement Number was
detected. Cycle Power and see what
happens. Turn TriCoder OFF/ON. Call
for support if bad.
FILE NOT DEFINED
HIT ANY KEY_ You have selected a data file # that
has not been defined in the
PARTITIONS setup parameter. HIT ANY KEY. Go to Setup
and set PARTIONS.
FILE USED BY Pn
HIT ANY KEY_
You have selected a data file # with data
in it, collected by another program. n=1-3.
Select another data file #. HIT ANY KEY. Select another
data file #.
Firmware Download
Via Serial Port? Appears at Fail-Safe download or
normal download with serial Computer
Interface specified. Yes proceeds to download.
No exits to Mode Menu or
asks about USB download.
Firmware Download
Via USB Port? Firmware download has been
requested with wedge Computer
Interface or user has serial Computer
Interface and has said NO to “serial
firmware download?” Yes proceeds to firmware
download. No exits to Mode
Menu.
HOST NOT RESPONDING
HIT ANY KEY_ The TriCoder requested a table but the
host is not responding. Check host computer.
IDENTIFIER ERROR
HIT ANY KEY_
You have entered data that doesn’t
match the DATA ID specified. Re-enter your data or change
the DATA ID.