TriCoder Portable Bar Code Reader, Руководство пользователя

Страница: 108 / 245

8-18
Make sure the statement number you specify is a valid statement. If your
program is a simple one statement program (assuming it is statement #01),
you would specify statement #01 as the YES/NEXT STMT.
When editing a program, you cannot delete or remove statements, but you
can simply not go to them. For example, lets say statement #01 is the item
number, statement #02 is the bin number and statement #03 is the quantity.
Maybe you decide you don’t need to prompt for the bin number anymore
and want to remove the statement. Change the YES/NEXT STMT field for
statement #01 to go to statement #03. See the coding form example below
to see how this would work.
Stmt # Prompt Text Yes/Next Stmt
01 ITEM NUMBER 03
02 BIN NUMBER 03
03 QUANTITY 01
• No/End Statement
The NO/END STMT field determines where the program goes if the END
key is pressed, or in the case of a question statement, where the program
goes if the NO key is pressed.
NO/END STMT 01
99_
For a question statement, this field simply tells the TriCoder where to go
next when the question is answered with NO. In the instance of the END
key, what can happen next can vary.
Pressing the
END
key can have a different effect; depending on what
statement you go to next:
•
Go to any valid statement by specifying that statement number in
the NO/END STMT field. Besides simply going to another
statement, this allows you to use the
END key to break out of
complex data collection loops. For example, say you have a
program that prompts for (1)BLDG., then (2)AISLE, then
(3)ITEM, then (4)QUANTITY, with a loop that goes back to
ITEM after QUANTITY. To break out of the loop at ITEM and go
back to BLDG, use 01 in the NO/END STMT for ITEM. To
break out of the loop at QUANTITY and go to AISLE, use 02 in
the NO/END STMT for QUANTITY.
•
If you want to exit data collection when the
END
key is pressed,
specify 99 in the NO/END STMT field.
•
If you want to disable the END key (have it do nothing), specify
statement #00 in the NO/END STMT field.