Trico FM-6 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 36

Trico FM-6 Скачать руководство пользователя страница 4

Page 4 of 36

1.

Introduction

The FM-6 Ferrogram Maker is a major component of Trico’s most advanced analytical Ferrograph
system. The FM-6 is more versatile, ergonomic and user friendly than its predecessors. Running on a
Windows 7 platform allows users to quickly upgrade software to the latest version, interface through the
internet, and set up e-mail capabilities. The USB connections can easily set up multiple pieces of lab
equipment together, connect to the user lab software or use peripheral devices such as the Ferroscope
camera. The provided Ethernet port allows users to network into their current systems.

The FM-6 instrument is designed with two independent stations to allow concurrent preparation of two
samples. Each station includes a holder to correctly position a sample slide over a magnetic field. The
FM-6 working in automatic mode, deposits a prepared fluid sample on the slide at a carefully controlled
rate. At the end of this sample deposition, a fixing solution washes the sample slide leaving only wear
particles and contaminants on the Ferrogram slide for analysis. Audio and visual signals indicate when the
Ferrogram is ready for microscopic evaluation on the Ferroscope.

The FM-6 can be operated in automatic, semi-automatic and manual modes. It offers several significant
advantages over its predecessor, the Dual Ferrograph, including automatic mode, reduced Ferrogram
production time, improved waste handling and fume venting. Configuration and settings can be changed
on the fly making it easier to control samples with different viscosities and to tune the unit for increased
production. An additional diagnostics feature helps to set-up and troubleshoot the unit.

1.1 – RELATED DOCUMENTATION

Trico offers the Wear Particle Atlas (P/N 76-0030) to support predictive maintenance efforts in helping to
identify wear particles. This Atlas is an encyclopedia of information exclusively involving wear debris
and measuring techniques. The Wear Particle Atlas is available with upgrade software versions. Contact
your dealer for further information. The User Manual is adequate for operating and maintaining the FM-6.

«
...
2
3
4
5
6
...
»

Содержание FM-6





































Отзывы:

Нет отзывов