Operation - TV Mode
Press any button on TV remote control
to turn on the switched outlets.
Press power on TV remote control to
turn on TV.
Use peripheral RF/IR remotes to turn
on peripherals as needed.
Step 2
Step 1
Step 3
When done watching TV press the
power button on the TV remote to
switch off the TV.
All switched outlets will then
automatically turn off after 1 minute.
Step 4
ON
OFF
www.tricklestar.com
Advanced Pow
Advanced
Pow
Outlet
7
Energy Saving
Countdown Timer Operation
For the first 15/30/60 minutes - the multi-sensor senses for RF/IR only.
For the next 15/30/60 minutes - the multi-sensor senses for RF/IR signal or
motion.
If no RF/IR or motion has been sensed during the 30/60/120 minute countdown
period, the switched outlets will switch off automatically.
Switched Outlets
Switch On
User Switches
TV On
15/30/60 Min Countdown
Timer
Starts
RF + IR Remote Control Button
Press Detected?
Next
15/30/60 Min Countdown
Timer Starts
RF/IR or Motion
Detected
TV & Peripherals
Switch Off
No
No
Yes
Yes
ALERTS START
10 Min Before Countdown
Timer Expiry
Buzzer Sounds 3X
LED Flashes
Terms
IR
IR Signal Sensor
PIR Sensor
Motion
Countdown Timer
Countdown Period
LED
Buzzer
Infrared signal, transmitted by a remote control
Multi-sensor senses for an IR command
Multi-sensor
uses passive Infrared sensing to
detect movement
Motion detected by PIR
Time before the switched outlets are automatically
switched off
30/60/120 minutes (default - 60 min.)
Red LED located in multi-sensor
When IR or motion is sensed, the LED will flash
Buzzer located in the multi-sensor
-
RF
Radio frequency, transmitted by a remote control
-
-
-
-
-
-
-
-
-
User Presses RF/IR
Remote Control
4
5
Ground LED
When illuminated, it indicates that the Product is correctly grounded.
If not illuminated, there is a grounding problem and you must contact an
electrician to properly ground the socket. Surge protection will not work
with an improperly grounded outlet.
Surge LED
When illuminated, it indicates that the surge protection is functioning
normally. If this LED illuminates red or extinguishes at any time, the
Product was sacrificed to protect your devices and must be replaced.
6
7
Switched Outlets LED
When lit, it indicates that the Outlets are powered.
Resettable Circuit Breaker
Provides protection for all Outlets on the product. If no devices are
powered or LEDs lit, press the circuit breaker to activate power.
8
Always On Outlets
Outlets remain ON all the time.
9
< tv > Outlet
The Outlet includes True RMS Power Measurement outlet for TV.
IMPORTANT
THE TV MUST BE PLUGGED INTO THIS OUTLET
Switched Outlets
Switched off if there is no RF, IR or movement is detected, or if the TV is
switched off.
1
2
3
RF/IR + Movement Multi-Sensor
The ZigBee multi-sensor is connected to the powerstrip via the RJ 11 port
- marked “sensor”. Mount the ZigBee multi-sensor on the underside of the
TV, near to the IR receiver on the TV. Typically located next to the TV
power on/off button. The multi-sensor must be located within line of sight
of where you normally use your remote controls.
Power Connection
The Product must only be plugged into a grounded receptacle for surge
protection to operate correctly. All connected devices should be plugged
directly into the Product. Use of an extension cord, adaptor or other
powerstrip in conjunction with the Product will void all warranties.
Sensor/RJ11 Port
Plug the RF / IR + Movement multi-sensor into this port.
There will be a soft audible ‘click’ when the connector is inserted correctly.
www.tricklestar.com
Advanced Pow
Advanced
Pow
Outlet
7
Product Overview
4 5 6
7
9
8
1
2
3
10
10
