TriBrer AOF500, Руководство пользователя

Страница: 16 / 24

ReCall
Save
14
PON optical power meter - data storage
ReCall
Save
The measured data storage is used to record the important
measured data, which can be used to analysis after measuring.
Under measurement interface, press
button can
display the saved historical data. Press Up or Down button
can browse records and show the data number on the top of
the screen. Press this button for two seconds under current
interface, the number will be showed on the upper left of the
screen and store the current measured data(by dBm value).
The device can store 100 records at most. The data number
will plus 1 automatically. If stores fully, the device will
overwrite the first record automatically. Successively store
data as above-mentioned.
Press
button again, back to measurement
interface.